Advertisement
Available languages
Available languages
Alarm Function
General Information
•
You'd like to be woken up by radio? First set a station. The deice switches on the last FM radio station that was
set.
•
When the alarm time is reached, a dot flashes next to "BUZZER AL1" or "RADIO AL1" and/or "BUZZER AL2" or
RADIO AL2".
Setting of the Alarm (in standby mode)
You can set two alarm times. Proceed as follows:
Keep the AL1/VOL− button pressed for approx.3 seconds. The indicator begins to flash.
4.
5.
Set the hours with the HOUR/TU– button and the minutes with the MIN/TU+ button.
Then use the AL1/VOL− button to select how you want to be woken up. Select from:
6.
• Buzzer (AL1 BUZZER):
A buzzer sounds when the alarm time is reached. The volume of the buzzer cannot be adjusted.
• Last heard radio frequency (AL1 RADIO):
As soon as your set alarm time is shown, the radio switches on. The last tuned
FM station plays at the last
set volume.
After you have made the setting, the selected alarm time flashes for ca.3seconds.
The alarm time is stored. Then
8.
the current time is displayed.
To set the second alarm time, repeat the above steps with the AL2/VOL+ button.
NOTE:
•
In case of an activated alarm time, a dot will light up at "AL1 BUZZER/ AL1 RADIO" and/or at "AL2
BUZZER/ AL2 RADIO".
•
If you do not press a button within 4 seconds, the settings are accepted automatically.
•
The alarm function ends automatically after approx. 60 minutes and the device switches off.
Turning off the Alarm
To shut the alarm signal off until the next day, press the ON/OFF button.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 9 minutes with the SNOOZE/SLEEP button.
NOTE:
If the function is activated, the dot next to "AL1 BUZZER" / AL1 RADIO" and/or at "AL2 BUZZER / AL2 RADIO" will
flash.
Deactivate the Alarm Function (in standby mode)
Press AL1/VOL− or AL2/VOL+ until the dot at "AL1 BUZZER/ AL1 RADIO" and/or at "AL2 BUZZER/AL2 RADIO" goes
out.
Technical Data
Model:
CT-3888
Power supply:
DC 5V, 1A
Power consumption:
5W
Battery power reserve:
2x 1.5V, AAA, R03
Frequency range:
FM 87.5 ~ 108.0MHz
External power adaptor
AC 100−240V, 50/60Hz, 0.18A
Input:
Output:
DC 5V/1A
Polarity:
Protection class:
II
The right to make technical and design modifications in the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
IMPORTANT SAFETY INSTRUCTIONS
Warning:
13.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
14.
Attention should be drawn to environmental aspects of battery disposal.
15.
Do not install this equipment in a confined or building-in space such as a book case or similar unit, and
remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation
openings with items such as newspaper, table-cloths, curtains etc.
16.
WARNING: Only use attachments/accessories specified or provided by the manufacturer.
17.
WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information
before installing or operating the apparatus.
18.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as
vases, shall not be placed on apparatus.
19.
WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such
as sunshine, fire or the like.
20.
WARNING: The direct-plug switching adaptor is used as disconnect device, the disconnect device shall
remain readily operable.
21.
When not in use and during movement, please take care of the power cord set. When put into use again,
please make sure the power cord set being not damaged, if any damages found, please look for the
service person to replace the power cord set specified by the manufacturer or have the same
characteristics as the original one.
22.
Use of the apparatus in moderate climates.
23.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
This equipment is a Class Ⅱ or double insulated electrical appliance. It has been designed in
24.
such a way that it does not require a safety connection to electrical earth.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the product or packaging means that the product should not be treated as household
waste. Do not throw garbage at the end of its life, but take it to a collection center for recycling. in this
way you will help to protect the environment and be able to prevent any negative consequences that
it would have on the environment and human health.
To find your nearest collection center:
-Contact local authorities
- Access the website:
www.mmediu.ro
- Request additional information from the store where you purchased the product.
Advertisement
