Axis Q60-E Series Repainting Instructions page 6

AXIS Q60-E Series
Repaint the product
1. Mask the top surface of the chassis. Make sure the push-pull connector housing, chassis hook and bayonet screws
are properly masked.
2. Mask the entire opening in the bottom of the chassis. Make sure that the masking line is close to the original paint border so
that no paint particles can reach the inside of the camera. Outline drawing of the opening can be found on www.axis.com.
3. Make sure all necessary preparations of the chassis and the dome cover ring have been made. See Preparations on page 3 .
4. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer.
5. Let the paint dry.
6. To get a better coverage and clearer color, apply a second layer of spray paint.
7. When the paint is dry, remove the masking.
6