BOXLIGHT MimioDisplay 3 Installation & User Manual page 28

Software
Area Feature
Switch on/off WiFi and select an access
point. Certificates can be installed, and
hidden networks be added. The last known
Side Toolbar > access points will be connected to
Settings > automatically after the MimioDisplay has
System > completed its boot-up sequence. The icon
WLAN on the home screen will change and the time
be updated (if set from the network).
A known access point can be connected to
or forgotten.
Switch on Ethernet connection. Advanced
Side Toolbar >
network settings like a Static IP Address and
Settings >
Proxy can be set-up. To add a proxy, turn on
System >
settings to Manual and add the proxy server
Ethernet
host address and port, you can define
websites that the proxy does not apply.
If the MimioDisplay is connected the LAN
using Ethernet, then it can be used as a
Side Toolbar >
hotspot for a few devices in the room.
Settings >
System >
Hotspot
Simply switch-on, name the hotspot, choose
the security protocol (recommend WPA2
PSK) and create a password.
Turn on Bluetooth and connect to available
Side Toolbar >
devices. The MimioDisplay will advertise
Settings >
itself as "Realtek Bluetooth".
System >
To configure or forget a connected device
Bluetooth
press its setting's cog.
To configure and change the MimioDisplay's
Security & Privacy settings. The default
Side Toolbar >
password is "888888" and this can be
Settings >
changed. From here the administrator can
System >
set a lock screen that the end user must
Security &
authenticate after boot-up. For the user to
Privacy
lock the screen it also needs to be enabled
here.
28 MimioDisplay 3 Installation and User Guide
Screenshot