BOXLIGHT MimioDisplay 3 Installation & User Manual page 27

Area Feature
Change the HDMI EDID (Extended Display
Side Toolbar >
Identification Data – it describes the
Settings >
capabilities of the display to the source of
HDMI EDID
video) from EDID 2.0 to EDID 1.4, and back
again.
Change the HDR (High Dynamic Range) to:
Side Toolbar > •
•
Settings >
•
HDR
•
•
Settings for the MimioDisplay's audio.
Change the:
•
•
•
Side Toolbar >
•
Settings >
Select whether the Output be set to internal
Sound
or external speakers. If External is selected
the current source's audio will be outputted
to SPDIF, Audio Out 3.5mm and HDMI OUT.
The settings above apply to both outputs,
irrespective of the source.
System settings for the MimioDisplay's select
an option to change or configure:
1. WLAN
2. Ethernet
3. Hotspot
Side Toolbar >
4. Bluetooth
Settings >
5. Security & Privacy
System
6. Advanced Settings
7. Time & Date
8. Language & Keyboard
9. Power Settings
10. System
Auto
Low
Middle
High
Ref Mode
Volume
Balance
Bass
Treble
Screenshot
MimioDisplay 3 Installation and User Guide
Software
27