Fire Cam Onyx User Manual page 5

SETTINGS.TXT File
You can change the settings of the camera via the SETTINGS.TXT file. The file will be
created automatically on the micro SD card after the camera is turned ON. Plug the
camera into the PC via the USB cable and open the Settings file. When changing settings
keep all line spacing the same. Replace number by highlighting it. Click Save file to save
new settings.
!
*Video Resolution- Frames per second options include:
4k@30fps/1080p@60fps; 4k@30fps/1080p@120fps; 4k@30fps/1080p@30fps
*Video Time-to avoid accidental loss of video, record time is saved in time segments.
15 minute intervals is default setting. Maximum interval time in 4k and 1080p120fps
is 18 minutes and 30 minutes in 1080p60fps and 1080p30fps.
*Loop record- On will record over oldest video files when SD card is full
*Date Stamp-On will stamp video/picture with date and time.
*Time Set format is Year.Month.Day.Hour(military):Minute:Second.
Change N to Y to change and save file.
NOTE: Date/Time will reset to default after battery is discharged or removed for more
than 30 minutes.
*Auto_Power_Off- On will power off camera when in standby mode after
3min/5min/10min