Playback On Your Computer - Fire Cam Onyx User Manual

Playback On Your Computer

!
Remove the rear audio cap ③. Connect to computer via USB cable
from the USB port ⑤. The camera will turn on and be recognized
automatically as USB Device. You can also remove the micro SD
card and use your own card reader connected to the computer.
On a MAC
Plug the Fire Cam Onyx into your MAC with the included USB cable
and turn your camera on. The MAC OS will recognize the camera
as an external hard drive. Ensure that the camera is set to video
mode before connection to MAC.
IMPORTANT TIP FOR MAC USERS
When deleting files from your micro SD memory cards, you must
empty the trash before removing it or unplugging the Fire Cam
Onyx. If you do not empty your trash the photos and videos files will
not be completely erased from your cards.
The device must be power on while connected with
computer for data download. Do not remove the
battery. The camera will be recognized as a storage
device on PC only when mode switch is set to video.
When you remove the battery while the video is
playing, damage to your video data could occur.