Related Manuals for Fire Cam Onyx
Summary of Contents for Fire Cam Onyx
- Page 1 Fire Cam Onyx User Manual Welcome • Thank you for purchasing the Fire Cam Onyx • Please read this instruction manual to ensure correct operation of the camera prior to use.
- Page 2 2. Battery 2pcs 3. USB Cable 4. Charger 5. Waterproof Cap 6. Rubber O-ring 6pcs 7. Silicon Grease Fire Cam Onyx OVERVIEW ② Power / Shutter ③ Rear Audio Cap ④ Mode Switch ① ⑤ USB ⑥ Micro SD Card Slot ⑦...
-
Page 3: Initial Setup
Memory cards should be formatted for trouble free performance of the camera on first use and after transferring video files. All data will be erased when formatting so make sure all important video files are transferred first. Fire Cam recommends SD Card Formatter at: https://www.sdcard.org/downloads/formatter_4/... -
Page 4: Installing/Removing Battery
To remove the battery, pull it out with a firm grip. Power on/off Your Fire Cam Onyx Turn on the Fire Cam Onyx by pressing the Power/ Turn Fire Cam Onyx On Shutter button ② until the blue LED turns on. The camera will vibrate once long. - Page 5 SETTINGS.TXT File You can change the settings of the camera via the SETTINGS.TXT file. The file will be created automatically on the micro SD card after the camera is turned ON. Plug the camera into the PC via the USB cable and open the Settings file. When changing settings keep all line spacing the same.
-
Page 6: Take A Video
Take Still Pictures To take still pictures with the Fire Cam Onyx, make sure that the Video/Photo switch ④ is set to the left for photo mode. You may switch ⑨... -
Page 7: Playback On Your Computer
When deleting files from your micro SD memory cards, you must empty the trash before removing it or unplugging the Fire Cam Onyx. If you do not empty your trash the photos and videos files will not be completely erased from your cards. -
Page 8: Technical Specifications
LED STATUS TABLE REMARKS: THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE. Contact Fire Cam Support at 618-416-8390, M-F Central or support@firecam.com for assistance or replacement parts. Additional batteries, external battery charger, and mounting options are available at www.firecam.com. Technical Specifications... - Page 9 Optics: • WIDE ANGLE view • f/2.0, fixed focus glass lens Video: • Resolution Settings: 4K: 3840x2160 @ 30fps • Full HD Resolution Settings: 1080p: 1920x 1080 @120/ 60/30fps • Sensor Type: 1 / 2.3” HD CMOS • Light Sensitivity: 1.4 V/lux-sec (550nm) •...
- Page 10 Equipment, which is repaired under this warranty will be returned freight prepaid. If it is determined that the Fire Cam does not need repair, the purchaser shall pay for return shipping charges. Disclaimer: Fire Cam does not assume any responsibility for any accidents or injuries incurred to the user of the Fire Cam Fire Helmet Camera.
- Page 11 Illinois. Recipients of orders shipped to other states are responsible for complying with state and local tax laws. You will receive an emailed confirmation, if you provided it with your order. Fire Cam ships to PO boxes via USPS.
- Page 12 We will notify you via e-mail once your return has been processed. Depending on where you purchased your Fire Cam®, some cameras may be covered under the "Fire Cam Damage" warranty throughout the warranty period.