Contec BUF-PCI(PC) User Manual page 43

Notes!
- The second BUS-PCI(PCI) board cannot be properly installed
unless the resources (I/O addresses and interrupt level) for the board
can be allocated. Before attempting to install the second board, first
determine what PC resources are free.
- The resources used for each BUS-PCI(PCI) board do not depend on
the location of the PCI bus slot or the board itself. If you remove two
or more BUS-PCI(PCI) boards that have already been installed and
then re-mount one of them on the computer, it is unknown which one
of the sets of resources previously assigned to the two boards is
assigned to the re-mounted board. In this case, re-check the
resource settings.
BUF-PCI(PC), BUF-PCI(98)
Setup
35