Table of Contents
Advertisement
Setup
- The resources used for each BUS-PCI(PCI) board do not depend on
the location of the PCI bus slot or the board itself. If you remove two
or more BUS-PCI(PCI) boards that have already been installed and
then re-mount one of them on the computer, it is unknown which one
of the sets of resources previously assigned to the two boards is
assigned to the re-mounted board. In this case, check the resource
settings again.
Installing the BUF-PCI driver software
Install the BUF-PCI driver software following these steps.
(1) Start Windows XP with Administrator.
(2) Exit all other running applications.
(3) Insert BUF-PCI Driver Install Disk 1 into the disk drive.
(4) Start Explorer.
(5) Click the disk drive into which BUF-PCI Driver Install Disk 1 is
(6) Select and double-click the SETUP.EXE file.
(7) Follow the instructions displayed on the screen by the setup
(8) When the setup program ends, the installation of the BUF-PCI
Note!
If you need to uninstall the BUF-PCI driver software, uninstall it using
[Add/Remove Programs] in [Control Panel].
Restarting the system
Restart your system.
16
inserted.
program.
driver software is complete.
BUF-PCI(PC), BUF-PCI(98)
Advertisement
Table of Contents
