Finishing Touches; Removing Road Salt - Honda Dream Neo Owner's Manual

4. After cleaning,
thoroughly with plenty of clean water.
strong detergent residue can corrode
alloy parts.
5. Dry the vehicle, start the engine, and
let it run for several minutes.
6. Test the brakes before riding the vehicle.
Several applications may be necessary
to restore normal braking performance.
7. Lubricate the drive chain immediately
after washing and drying the vehicle.
Braking efficiency may be temporarily
impaired immediately after washing the
vehicle.
Anticipate longer stopping distance to avoid
possible accident.
76
rinse the vehicle

Finishing Touches

After washing your vehicle, consider using a
commercially-available spray cleaner/ polish
or quality liquid or paste wax to finish the
job. Use only a non-abrasive polish or wax
made specifically for vehicle or automobiles.
Apply the polish or wax according to the
instructions on the container.

Removing Road Salt

The salt contained in the road surface
freezing prevention
road was sprayed with in winter, and the
seawater becomes the cause which rust
occurs in.
Wash your vehicle by the following point
after it runs through such a place.
1. Clean the vehicle using cool water
(Ref. page 75).
Do not use warm water.
This worsens the effect of the salt.
2. Dry the vehicle and to protect surface of
metal, apply wax on it.
Honda Motorcycle & Scooter India Pvt. Ltd.
medicine which a