Honda Dream Neo Owner's Manual page 63

2. Remove the
Move the chain up and down with
your finger. Drive chain slack should
be adjusted approximately to allow the
following vertical movement by hand:
Chain slack should be:
30-40 mm (1.18-1.57 in)
3. Rotate the rear wheel. Stop, Check
the drive chain slackness. Repeat this
procedure several times. Drive chain
slack should remain constant. If the
chain is slack only in certain sections,
some links are kinked and binding.
Binding and kinking can be eliminated
by lubrication.
(1)
¼fujh{k.k dS i ½
(1) Inspection cap
¼Mª k bo ps u ½
(2) Drive chain
Honda Motorcycle & Scooter India Pvt. Ltd.
inspection cap (1). 4. Remove the bolts (3).
5. Press the lugs (4).
6. Release all the claws (7)from both the
chain case covers and carefully remove
them
expose the drive chain.
(3)
(3) Bolts ¼cks Y Vl½
(4) Lugs ¼yXl½
(2)
(5) Upper chain case
(6) Lower chain case
(7) Claws ¼DykW t + ½
from swingarm
(5)
(7)
(7)
(6)
¼Åijh ps u ds l ½
¼fupyk ps u ds l ½
assembly to
(4)
55