Idle Speed - Honda Dream Neo Owner's Manual

Clearance should be:
Intake:0.10 mm (0.004 in)
Exhaust:0.15 mm (0.006 in)
Finally, recheck the clearance to make sure
that adjusting has not been disturbed.

IDLE SPEED

Refer to the safety precautions on page 40.
The engine must be at normal operating
temperature for
adjusting. 10 minutes of stop-and-go riding
is sufficient.
Do not attempt to compensate for faults in
other systems by adjusting idle speed. See
your Honda dealer for regularly scheduled
carburetor adjustments.
52
accurate idle speed
(1) Throttle stop screw
¼?kVk,s a ½
(A) Decrease
(B) Increase ¼c<+ k ,s a ½
1. Warm up the engine, shift to neutral and
place the vehicle on its center stand.
2. Connect a tachometer to the engine.
3. Adjust idle speed with the throttle stop
screw (1).
Idle speed (In neutral):
1400±100 min
Honda Motorcycle & Scooter India Pvt. Ltd.
(1)
¼Fkz k W V y LVkW i LØw ½
(rpm)
-1