Setting Up Your Camera; Pre-Installation Checklist & Initial Camera Settings - Ikelite 6961.09 Manual

Setting Up Your Camera

Pre-Installation Checklist & Initial Camera Settings
1. Insert a fully charged camera battery.
2. Insert a properly formatted memory card.
3. Set Mode Dial to "M" Manual mode to manually adjust both
aperture and shutter speed settings.
4. Set ISO Sensitivity to "200."
5. Set Focus Mode Lever switch to AFS/AFF.
6. Set Metering Mode to
7. Set Flash Mode to
optic strobe.
8. Set Shutter Type to "MSHTR." Flash may not fire if this setting is
incorrect.
9. Set Touch Settings to "OFF."
10. In Custom Monitor / Display Menu: Set Auto Review to "5SEC."
11. In Custom Focus Menu: Set Eye Sensor AF and AF Assist Lamp to
"OFF."
12. In Eye Sensor, set LVF/Monitor Switch to "MON."
13. Set AF Mode to "1-Area."
14. In Economy, set Sleep Mode to "5MIN." and Auto LVF/Monitor Off
to "5MIN."
15. Press Fn1 button and set Post Focus to "OFF."
"Center-Weighted."
"Forced Flash On" when connecting a fiber
7