Click Set button.
Click on Start auto configuration button in the left navigation menu.
You'll have to wait couple of seconds for the configuration to be updated.
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Retrieved from "http://wiki.bicomsystems.com/Gigaset_N870"
Example for IP Address using HTTP:
http://192.168.1.10/prov/%MACD.xml
Disclaimers - About Bicom Systems Wiki
NOTE:
Do not power