Power Connector - HP ENVY 17m Maintenance And Service Manual

Power connector

Table 5-18 Power connector description and part number
Description
Power connector
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the USB board (see
5. Remove the display (see
Remove the power connector cable:
1. Remove the cable from the clips in the computer (1).
2. Remove the power connector and cable from the computer (2).
Reverse this procedure to install the power connector cable.
56 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 30).
USB board on page 42).
Display assembly on page
27).
54).
Spare part number
L52659-001
26).