Wlan Module - HP ENVY 17m Maintenance And Service Manual

WLAN module

Table 5-4 WLAN module description and part number
Description
Intel Wireless-AC 9560 802.11ac 2 × 2 Wi-Fi + Bluetooth 5
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/black WLAN antenna cable
connects to the WLAN module #1/Aux terminal.
2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the WLAN module to the bottom cover. (The WLAN
module tilts up.)
Bottom cover and rubber feet on page
Battery on page
Models have either one or two WLAN antennas. On models with two antennas, the #1/white
(Preparation for disassembly on page
30).
Spare part number
L22634-005
26).
27).
Component replacement procedures 33