Dell OptiPlex 7780 All-In-One Service Manual page 88

Table 3. System setup options—System information menu(continued)
General-System Information
Maximum Clock Speed
Processor L2 Cache
Processor L3 Cache
HT Capable
64-Bit Technology
Device Information
SATA-0
M.2 PCIe SSD-0
M.2 PCIe SSD-1
LOM MAC Address
Video Controller
dGPU Video Controller
Video BIOS Version
Video Memory
Panel Type
Native Resolution
Audio Controller
Wi-Fi Device
Bluetooth Device
Boot Sequence
Boot Sequence
Boot List Option
UEFI Boot Path Security
Date/Time
Table 4. System setup options—System Configuration menu
System Configuration
Integrated NIC
Enable UEFI Network Stack
SATA Operation
Drives
SMART Reporting
88 System setup
Displays the maximum processor clock speed.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays whether the processor is HyperThreading (HT) capable.
Displays whether 64-bit technology is used.
Displays the SATA-0 device information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the LAN On Motherboard (LOM) MAC address of the computer.
Displays the video controller type of the computer.
Displays the discrete graphics information of the computer.
Displays the video BIOS version of the computer.
Displays the video memory information of the computer.
Displays the Panel Type of the computer.
Displays the native resolution of the computer.
Displays the audio controller information of the computer.
Displays the wireless device information of the computer.
Displays the bluetooth device information of the computer.
Displays the boot sequence.
Displays the available boot options.
Displays the UEFI Boot options.
By default, the Always Except Internal HDD option is enabled.
Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.
Controls the on-board LAN controller.
Enable or disable UEFI Network Stack.
By default, the Enable UEFI Network Stack and Enabled w/PXE options are
enabled.
Configure operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is enabled.
Enable or disable various drives on board.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology (SMART)
during system startup.
By default, the Enable SMART Reporting option is not enabled.