Installing The Height Adjustable Stand - Dell OptiPlex 7780 All-In-One Service Manual

Installing the height adjustable stand

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
NOTE: Follow the same procedure to install the Height Adjustable Stand with Optical Disk Drive.
About this task
The following image provides a visual representation of the height adjustable stand installation procedure.
Steps
1. Align the tabs on the stand with the slots on the back cover.
2. Snap the stand until it clicks into place.
Next steps
1. Follow the procedure in After working inside your computer.
16 Removing and installing components