2. Install the
rear-I/O
bracket.
3. Install the
bottom
cover.
4. Install the
system-board
5. Install the
hard
drive.
6. Install the
back
cover.
7. Install the
cable cover
(optional).
8. Install the stand.
9. Follow the procedure in
Audio board
Removing the audio board
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
cable cover
4. Remove the
back
cover.
5. Remove the
system-board
6. Remove the
wireless
card.
7. Remove the
bottom
cover.
8. Remove the
rear-I/O
bracket.
9. Remove the speakers.
10. Remove the
side-I/O
board.
About this task
The following image provides a visual representation of the audio board removal procedure.
Steps
1. Disconnect the audio-board cable from the connector on the system board.
2. Remove the screw (M3x5) that secure the audio board to the display-assembly base.
74
Removing and installing components
shield.
After working inside your
computer.
Before working inside your
(optional).
shield.
computer.