6. Replace the two screws (M3x5) to secure the camera door to the display-assembly base.
Next steps
1. Install the
system-board
2. Install the
back
cover.
3. Install the
cable cover
(optional).
4. Install the stand.
5. Follow the procedure in
Bottom cover
Removing the bottom cover
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
cable cover
4. Remove the
back
cover.
5. Remove the
system-board
About this task
The following image provides a visual representation of the bottom cover removal procedure.
42
Removing and installing components
shield.
After working inside your
computer.
Before working inside your
(optional).
shield.
computer.