Installing DC-in port
1
Place the DC-in port in the computer.
2
Tighten the M2.5xL5 screw of the hinge to secure port.
3
Connect the DC-in cable to the system board.
4
Install the:
a
battery
b
base cover
c
microSD card
5
Follow the procedure in
Audio board
Removing the audio board
1
Follow the procedure in
2
Remove the:
a
microSD card
b
base cover
c
battery
3
To remove the audio board:
a
Disconnect the audio board cable from its connector on the system board [1]
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
25