Configuration Network - Alpha ESS SMILE-BAT-10.3P Quick Installation Manual

Configuration Network

Please install the WiFi module.
Download and install the APP by
scanning the QR code (Figure 1),
and directly connect to this device
by WiFi module.
Figure 1: AlphaESS-APP
Step3
If your mobile phone hasn't connected to
the system hotspot, please open the Wi-Fi
network list. Please find the hotspot named
by the product SN in WLAN list then enter
the password 12345678 and connect to it.
After successfully setting it, please go back
to APP and click "Next".
Step1
Open AlphaESS APP,
click the "Wi-Fi
Configuration" button
and enter the WiFi
configuration
interface as shown in
Figure 2.
Figure 2: Network Setting
Connect to Router System
the hotspot Configuration Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Open the Wi-Fi network list
Cancel
Figure 4: Open WiFi Network List
Step2
Please check whether
your mobile phone
has connected to the
system hotspot, as
shown in Figure 3.
Login
Register
Figure 5: WLAN Password
Connect to Router System
the hotspot Configuration Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Next
Figure 3: Hardware Connection
ADD: 002
Figure 6: WiFi Module