Launch X-431 Manual page 5

LAUNCH
Click [GAZ V10.06 diagnostic]. The screen will
display the information as shown in Figure 06.
Figure 06
The software can diagnose all systems of GAZ
vehicle up to 2003.
Click [OK] button. X-431 begins to reset and
check the SMARTBOX, and load the diagnostic
program from the CF card. After download, the
screen will display the message as shown in
Figure 07.
Button descriptions:
[OK]: to go on the test.
Click [OK] button. X-431 will read the version
information of ECU on the tested vehicle as
Figure 07
X-431 Russia GAZ Diagnosis
shown in Figure 08.
After reading the version information of ECU,
the screen will display the system menu as
shown in Figure 09.
The test procedures of the two systems are
similar, here we only gives the test procedures
of [NICAS 7.1]. Click [NICAS 7.1], the screen
will display the corresponding function menu as
shown in Figure 10.
3
Figure 08
Figure 09