Network - D-Link COVR Series User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of Covr Point A
and configure the DHCP settings. In the Settings menu on the bar on the top
of the page, click Network. Click Advanced Settings... to expand the list and
see all of the options.
Network Settings
Enter the IP address of Covr Point A. The default IP address is
LAN IP Address:
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Enter the subnet mask of the router. The default subnet mask is
Subnet Mask:
255.255.255.0.
The default address to access the web configuration utility is
Management
http://covr.local/ Here, you can replace "covr" with a different name.
Link:
If you change the management link, you will be required to browse
to the new URL in order to access the web UI.
Enter the domain name (optional).
Local Domain
Name:
Disable to transfer the DNS server information from your ISP to your
Enable DNS Relay:
computers. If enabled, your computers will use Covr Point A for a
DNS server.
D-Link COVR-2202 || COVR-2200 User Manual

Network

41