D-Link COVR Series User Manual page 35

Section 3 - Configuration
Advanced Settings - Address Autoconfiguration Settings
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable Automatic
Enabling this feature presents additional configuration options.
IPv6 Address
Assignment:
Enable or disable DHCP-PD for other IPv6 routers connected to the
Enable Automatic
LAN interface. This option is only available if Enable DHCP-PD is
DHCP-PD in LAN:
enabled.
Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Autoconfiguration
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Enter the router advertisement lifetime (in minutes).
Router
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (Start):
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (End):
If Enable DHCP-PD is disabled, enter the IPv6 address lifetime (in
IPv6 Address
minutes).
Lifetime:
Click Save when you are done.
D-Link COVR-2202 || COVR-2200 User Manual
Auto Configuration (SLAAC/DHCPv6) (Continued)
31