D-Link COVR Series User Manual page 34

Section 3 - Configuration
Select Auto Configuration (SLAAC/DHCPv6) if your ISP assigns your IPv6
address when your router requests one from the ISP's server. Some ISPs
require you to adjust these settings before your router can connect to the IPv6
Internet.
IPv6 DNS Settings
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If Use the following DNS address is selected:
Enter the primary DNS server address.
Primary DNS
Server:
Enter the secondary DNS server address.
Secondary DNS
Server:
LAN IPv6 Address Settings
Enable or disable prefix delegation services.
Enable DHCP-PD:
Displays Covr Point A's LAN link-local address.
LAN IPv6 Link-
Local Address:
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
Enter a valid LAN IPv6 address.
LAN IPv6 Address:
Displays Covr Point A's LAN link-local address.
LAN IPv6 Link-
Local Address:
D-Link COVR-2202 || COVR-2200 User Manual
Auto Configuration (SLAAC/DHCPv6)
30