D-Link COVR Series User Manual page 33

Section 3 - Configuration
Advanced Settings - Address Autoconfiguration Settings
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable Automatic
IPv6 Address
Assignment:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Autoconfiguration
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Enter the router advertisement lifetime (in minutes).
Router
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (Start):
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (End):
Enter the IPv6 address lifetime (in minutes).
IPv6 Address
Lifetime:
Click Save when you are done.
D-Link COVR-2202 || COVR-2200 User Manual
Static IPv6 (Continued)
29