Ipv6 - D-Link COVR Series User Manual

Section 3 - Configuration
To configure IPv6 routes, on the Static Routes page click IPv6. To return to the
main IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rules button. Click Save when you are done. If
you edit or create a rule, the following options will appear:
Enter a name for the route.
Name:
This is the IP address of the router used to reach the specified
DestNetwork:
destination.
Enter the IPv6 address prefix length of the packets that will take this
PrefixLen:
route.
Enter your next hop gateway to be taken if this route is used.
Gateway:
The route metric is a value from 1 to 16 that indicates the cost of using
Metric:
this route. A value of 1 is the lowest cost and 16 is the highest cost.
Select the interface that the IP packet must use to transit out of the
Interface:
router when this route is used.
Click Apply when you are done.
D-Link COVR-2202 || COVR-2200 User Manual

IPv6

52