Basic Operating Instructions; Recording A Measurement; Enter Into The Measurement Screen; Record Signal As Desired - Noraxon Ninox Series User Manual

Ninox Hardware User Manual

6 Basic Operating Instructions

6.1 Recording a Measurement

Step 1
Within the Home screen, click on the myoVIDEO
module icon.
Create a New Subject
Select New Configuration New Configuration New Configuration New Configuration. . . .
Step 2
Insert the devices to be used for the measurement
into the configuration by dragging a device in from
the list of A A A A vailable vailable D D D D evices evices.
vailable vailable evices evices
You may configure lens correction, image quality,
resolution, video speed, and other settings here.
Refer to Se Se Se Section 7.1 ction 7.1 ction 7.1 for information on these ction 7.1
settings.
More details about the fps and resolution settings
for the Ninox 300C can be found in Section 11.3
for the Ninox 125 can be found in Section 11.4
Note: When working with the Ninox 300C, the various lens options make this camera robust to a wide
variety of work settings. Carefully select a lens based upon the field of view that is needed for your
specific use-case. Information on how to choose a lens can be found in Section 11.3

6.2 Enter into the Measurement Screen

Continue to the next step by selecting Measure.

6.3 Record Signal as Desired

After checking the quality of your picture, you are ready to record a measurement. Select Record
top left of the screen and begin your protocol. After completing your record, select Stop
the record as the name of your configuration, or type in a new name. After this, save your record or
Discard & measure again. Discard & measure again
Discard & measure again Discard & measure again

6.4 Storage and Protecting Between Use

For extended storage or when traveling:
Unplug the camera from the USB on the computer

Position all components (cameras and lenses) inside the travelling case according to their

prepared cavities.
(Rev B)
Section 11.3 and Section 11.3 Section 11.3
Section 11.4. Section 11.4 Section 11.4
Measure.
Measure. Measure.
Section 11.3.
Section 11.3 Section 11.3
Record at the
Record Record
Stop and Save Stop Stop Save. Save Save Save
16