Setting Up The Racing Wheel For Pc - Thrustmaster T150 Force Feedback User Manual

SETTING UP THE RACING WHEEL FOR PC*

*PC compatibility not tested nor endorsed by Sony Computer Entertainment Europe
Important note:
On PC, the USB sliding switch (5) on the racing wheel's base must always be set to the
PS3™ position.
1. Go to http://ts.thrustmaster.com to download the drivers and the force feedback software for PC.
In the Updates and Downloads section, click PC / Wheels / T150, then select Drivers.
2. Once the download is complete, launch the installation, and follow the on-screen instructions to
connect the wheel's USB plug to your computer and complete the installation.
3. Once the installation is complete, click Finish and restart your computer.
4. Select Start / All Programs / Thrustmaster / FFB Racing Wheel / Control Panel to open the Game
Controllers window.
The Game Controllers window displays the racing wheel's name T150 Racing Wheel with the status
OK.
5. Click Properties to configure your wheel in the T150 control panel:
axes, and to adjust the wheel's rotation angle in your PC games.
ce feedback effects.
You are now ready to play!
General notes:
- On PC, click OK to close the Game Controllers window before launching the game.
- On PC, the adjustments made in the Game Controllers window will only be saved on your
computer (hence they will have no effect on PlayStation 3 or PlayStation 4).
® ®
- Your wheel's firmware version is displayed in the upper right-hand corner of the T150 control panel
tabs.
11/18