Setting Up The Racing Wheel For Pc - Thrustmaster T300 Instruction Manual

SETTING UP THE RACING WHEEL FOR PC*

*PC compatibility not tested nor endorsed by Sony Computer Entertainment Europe
Important note:
On PC, the USB sliding switch (5) on the racing wheel's base must always be set to the PS3™
position.
1. Go to http://ts.thrustmaster.com to download the drivers and the force feedback software for PC. In the
Updates and Downloads section, click PC / Wheels / T300 RS, then select Drivers.
2. Once the download is complete, launch the installation, and follow the on-screen instructions to
connect the wheel's USB plug to your computer and complete the installation.
3. Once the installation is complete, click Finish and restart your computer.
4. Select Start / All Programs / Thrustmaster / FFB Racing Wheel / Control Panel to open the Game
Controllers window.
The Game Controllers window displays the racing wheel's name T300 RS Racing Wheel with the status
OK.
5. Click Properties to configure your wheel in the T300 RS control panel:
• Test Input tab: allows to test and view the action buttons, directional buttons, wheel and pedals axes,
and to adjust the wheel's rotation angle in your PC games.
• Test Forces tab: allows to test 12 force feedback effects.
• Gain Settings tab: allows to adjust the power of the force feedback effects in your PC games.
You are now ready to play!
General notes:
- On PC, click OK to close the Game Controllers window before launching the game.
- On PC, the adjustments made in the Game Controllers window will only be saved on your computer
(hence they will have no effect on PlayStation 3 or PlayStation 4).
® ®
- Your wheel's firmware version is displayed in the upper right-hand corner of the T300 RS control panel
tabs.
12/26