Advertisement
including: Belgium (BE), Bulgaria (BG), Czech Republic (CZ),
Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE),
Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy
(IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg
(LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia
(SI), Slovakia (SK), Finland (FI), Sweden (SE) and United
Kingdom (UK).
For the warning information of the frequency restriction,
please refer to the package or manual section.
• Disposal
The crossed-out wheeled-bin symbol on your product,
literature, or packaging reminds you that in the European
Union, all electrical and electronic products, batteries, and
accumulators (rechargeable batteries) must be taken to
designated collection locations at the end of their working life.
Do not dispose of these products as unsorted municipal
waste. Dispose of them according to the laws in your area.
IC Requirements:
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada's licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage;
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
RF Exposure Information
9
• DO NOT operate the radio without a proper antenna
attached, as this may damage the radio and may also cause
you to exceed RF exposure limits. A proper antenna is the
antenna supplied with this radio by the manufacturer or an
antenna specifically authorized by the manufacturer for use
with this radio, and the antenna gain shall not exceed the
specified gain by the manufacturer declared.
• DO NOT transmit for more than 50% of total radio use time,
more than 50% of the time can cause RF exposure
compliance requirements to be exceeded.
• During transmissions, your radio generates RF energy that
can possibly cause interference with other devices or
systems. To avoid such interference, turn off the radio in
areas where signs are posted to do so.
• DO NOT operate the transmitter in areas that are sensitive
to electromagnetic radiation such as hospitals, aircraft, and
blasting sites.
• Portable Device, this transmitter may operate with the
antenna(s) documented in this filing in Push-to-Talk and
body-worn configurations. RF exposure compliance is limited
to the specific belt-clip and accessory configurations as
documented in this filing and the separation distance between
user and the device or its antenna shall be at least 2.5 cm.
• Mobile Device, during operation, the separation distance
between user and the antenna subjects to actual regulations,
this separation distance will ensure that there is sufficient
distance from a properly installed externally-mounted antenna
to satisfy the RF exposure requirements.
• Occupational/Controlled Radio, this radio is designed for
and classified as "Occupational/Controlled Use Only",
meaning it must be used only during the course of
employment by individuals aware of the hazards, and the
ways to minimize such hazards; NOT intended for use in a
General population/uncontrolled environment.
• General population/uncontrolled Radio, this radio is
designed for and classified as "General
population/uncontrolled Use".
10
Advertisement
