Summary of Contents for Medline Microban MDS86960KDMB
Page 1
TRANSFER BENCH BANQUITO DE TRANSFERENCIA USER GUIDE GUIDE DE L’UTILISATEUR This Product Contains Dry Natural Rubber. Este Producto Contiene Hule Natural Seco. MICROBAN is a registered trademark of Microban Products Company. MICROBAN es una marca comercial registrada de Microban Products Company. MDS86960KDMB, MDS86960KDMBG MDS86960KDMB, MDS86960KDMBG (PIC-00303) Revision: 05/08/18...
√ Check the bench for cracks or ruptures in the plastic. If you have concerns, contact the manufacturer at 1-800-MEDLINE. √ Check that all push buttons are fully protruded from the mainframe through the leg extensions and are properly engaged.
Page 3
Transfer Bench Components Note: Before assembly, ensure that all parts and quantities match the parts list. Inspect all components for shipping damage. If any parts are missing or damaged, contact your dealer/retailer for replacements. A. Two Panel Section of Seat B.
Page 4
Assembly Instructions Flip the One Panel (B) and the Two Panel (A) Sections of the transfer bench upside down so the aluminum frame is visible. Insert the One Panel Section into the Two Panel Section (tubular hole). Ensure the push buttons are inserted all the way and are engaged properly.
With the transfer bench still upside down, insert the Back Rest (F) into the Three Panel Seat. Please ensure the push buttons are securely fastened before proceeding. Note: The back rest can be placed on either side of the of the transfer bench to accommodate the bath tub setup.
√ Compruebe el banquito en busca de grietas o rupturas en el plástico. Si tiene preocupaciones, contacte al fabricante al 1-800-MEDLINE. √ Compruebe que todos los pulsadores estén extendidos totalmente desde el marco a través de las extensiones de pata y estén apropiadamente enganchados.
Page 7
Componentes del Banquito de Transferencia Nota: Antes de ensamblar, asegúrese de que todas las partes y cantidades coincidan con la lista de partes. Inspeccione todos los componentes en busca de daños de envío. Si alguna parte falta o está dañada, contacte a su vendedor/distribuidor para reemplazos.
Instrucciones de Ensamblado Voltee las Secciones de Un Panel (B) y Dos Paneles (A) del banquito de transferencia para que el marco de aluminio sea visible. Inserte la Sección de Un Panel en la Sección de Dos Paneles (agujero tubular). Asegúrese que los pulsadores estén insertados hasta el fondo y apropiadamente enganchados.
Con el banquito de transferencia todavía boca abajo, inserte el Respaldar (F) en el Asiento de Tres Paneles. Asegúrese que los pulsadores estén apropiadamente sujetos antes de proceder. Nota: El respaldar pued ser colocado en cualquier lado del banquito de transferencia para acomodarse a la configuración de la bañera.
Need help?
Do you have a question about the Microban MDS86960KDMB and is the answer not in the manual?
Questions and answers