Download
Share
Print this page
Medline MDS86000G4 Step By Step Assembly Instruction
  1. Manuals
  2. Brands
  3. Medline Manuals
  4. Mobility Aid
  5. MDS86000G4
  6. Step by step assembly instruction

Medline MDS86000G4 Step By Step Assembly Instruction

Four wheeled kneewalker
Hide thumbs

Advertisement

Quick Links

Download this manual
STEP-BY-STEP
ASSEMBLY GUIDE.
Four Wheeled Kneewalker
MDS86000G4

Advertisement

loading
Need help?

Need help?

Do you have a question about the MDS86000G4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Medline MDS86000G4

Summary of Contents for Medline MDS86000G4

  • Page 1 STEP-BY-STEP ASSEMBLY GUIDE. Four Wheeled Kneewalker MDS86000G4...

  • Page 2: What's Included

    What’s Included: 2 MEDLINE | MDS86000G4 | PIC-00311 (Rev: 10-10-19)
  • Page 3 Assembly Guide Front Handle Bar Wheels General Warnings This guide applies to the following kneewalker: Frame Weight Item Number Description Color Capacity 4 wheel knee walker with 300 lbs Black MDS86000G4 padded foam knee rest and (136 kg) front storage basket.
  • Page 4 Unfasten the hook and loop strap that holds the tiller down to the kneepad. Raise the tiller to the upright position. The tiller will snap into position and lock when it reaches its full upright position. 4 MEDLINE | MDS86000G4 | PIC-00311 (Rev: 10-10-19)
  • Page 5 Lift Tiller Cam Lock and rotate it up and over the Tiller flange. Then press down to secure. Next: Set Desired Kneepad Height Raise the Kneepad to desired height.
  • Page 6 Insert the wheel stem into the tube, making sure to align the hole in the wheel stem with the hole in the tube. 6 MEDLINE | MDS86000G4 | PIC-00311 (Rev: 10-10-19)

  • Page 7: Adjusting The Knee Pad Height

    Adjusting The Knee Pad Height Loosen the Seat Cam Lock under the knee pad and remove locking pin. Adjust pad to the desired height. Reinstall the locking pin and secure it in place with the retainer tab. Next tighten the Seat Cam Lock to lock pad in place.
  • Page 8 (located on top of brake). Release the hand brake lever. When done correctly, push button with remain down and the hand brake lever will be locked in place. Rear wheels should not be able to rotate. 8 MEDLINE | MDS86000G4 | PIC-00311 (Rev: 10-10-19)
  • Page 9 To release the brake, pull the lever towards the hand grip. Push pin will pop up automatically. Next: Adjusting the Hand Brakes For minor adjustment use the brake adjuster located on the front of the tiller. Turn the thumbscrew counterclockwise to tighten the brake or clockwise to loosen the brake.
  • Page 10 Adjust the hand grip to the desired height and reinstall the adjustment screw by turning it clockwise until it is tightened. 10 MEDLINE | MDS86000G4 | PIC-00311 (Rev: 10-10-19)
  • Page 11 To Fold the Kneewalker Release the Seat Cam Lock and kneepad height adjustment pin. Lower the knee pad all the way. Lift Tiller Cam Lock.
  • Page 12 Slide assembly to the side until the tiller is disengaged. Fold the tiller down until it rests on the knee pad. 12 MEDLINE | MDS86000G4 | PIC-00311 (Rev: 10-10-19)