new brunswick Innova 43 Operation Manual page 81

12.2 Overview of Command Sets
NOTE:
When you are sending a command, do not allow the pause between any
two characters of your message to last longer than 10 seconds. If it takes
any longer, the shaker s serial port will reset itself.
Slave
CS<Space>150<CR>
R
Master sends:
RV<CR>
NOTE:
On power-up, even if the shaker is not set in
shaker will always send these four characters:
starting any communications, be sure to clear the computer s receive
buffer.
Command
New Brunswick Scientific Co., Inc.
Master
150 RPM
Master sends:
Master
RV
First the echo: RV<CR>
Then the report:
<Arg1><Tab><Arg2><Tab><Arg3>...<Arg7><CR><LF>
Space Arg1 Space
Innova 43/43R responds:
CS<Space>150<CR>
Innova 43/43R responds:
Slave
OK<CR><LF>
Argn Terminator
C CS
Slave
mode at the time, the
. Before
User s Guide
81