new brunswick Innova 43 Operation Manual page 21

Screen
Name
DISP
SUMM
SET
LAMP
COMM
CAL
PROG
* see Table 2, Display Screen Parameters
Parameter Name
Optional
5.4 Display Icons
New Brunswick Scientific Co., Inc.
Table 1: Screens
Meaning
Display Shows two user-selectable parameters* and actual values.
Summary Shows all parameters*, setpoints and actual values.
Set-Up Set day of week, set time, enable or mute alarm, lock or
unlock operating parameters
Lamps
Internal chamber light: ON (always on); OFF (always
off); AUTO (default mode), light goes on and stays on
when lid is open, shuts off 15 seconds after lid is closed,
and goes on for 15 seconds when Control Knob is moved.
Communication SET: set baud rate
(RS-232) OFF disables RS-232
MONITOR: PC commands shaker to read setpoints and
actual values on a schedule determined by PC software.
Parameters are unlocked and can be changed by program
or manually.
SLAVE: PC controls shaker and logs data.
TALK: Shaker sends setpoint and actual data to PC at
one-minute intervals.
Calibration Allows user to enter a temperature offset.
Self-calibrates the speed sensor.
Program Allows user to set up 1- 4 programs, each with 1-15 steps.
Table 2: Display Screen Parameters
RPM Shaking speed, in revolutions/minute
ºC Chamber temperature, in degrees Celsius
HRS Programmed time remaining, in hours
%RH Relative Humidity, in percent.
UV Status of Ultraviolet germicidal lamp
GRO Status of Photosynthetic growth lamps
Features/Modes
Photosynthetic lights (GRO): ON, OFF, NONE
UV Light (UV): ON, OFF, NONE
Optional
Meaning
21
Not installed
User s Guide