CAUTION!
Operating the Innova 43/43R at temperatures above 60ºC can result in
permanent damage to the sensor.
See Section 6.9 for instructions.
6.9
Filling the Water Reservoir
NOTE:
As you add water, do not allow the water to splash or flow into the recessed
middle of the pan, where the bearing housing assembly is mounted. Pour
water very slowly into the shallow area beyond the edge of the spill cover to
protect the bearing housing.
slowly
New Brunswick Scientific Co., Inc.
Figure 12d: Humidity Sensor Mounting
INSIDE WALL
OF CABINET
User s Guide
33