BQS BZC123 Instructions For Use Manual page 11

10. Do not leave heavy objects within the vehicle since these may
injure the child in the event of an accident.
11. Check that the buckle is properly fastened. It is important that
in the event of an emergency the child can be released quickly.
12. Make sure the seat does not become caught by the vehicle´s
door or reclining seat. Likewise, check that the seat is properly
and sufficiently fitted.
13. Never try to remove, change or add pieces to the seat or
harness since their basic and security functions may be
seriously affected.
14. Always fasten this safety seat into the vehicle with the seat
belt, even when not in use. Never leave your child unattended
when seated or not.
15. Contact our Customer Service for any question about installing
this child safety seat: +34 943 833 013.
16. Please keep this safety seat away from corrosive products.
17. The manufacturer guarantees the quality of its products but not
the quality of second-hand products or those registered under
other trademarks.
1. USE IN VEHICLES.
3-point lap and
diagonal seat belt
2-point lap seat belt
Only suitable for this
particular seat WHEN having
a lap and diagonal seat belt
(3 anchor points)
Sistema de retención infantil Child restraint system
20
Correct installation /
proper
Incorrect installation /
improper
Optional installation
BZC123 BZC123
2. SEAT PARTS AND FITTINGS.
A. Cover.
B Group 2 and 3 vertical belt hook.
C. Harness pads.
D. Ergo seat cushion for group 1.
E. Harness straps.
F. Buckle release-button.
G. Locking buckle.
H. Harness adjustment button.
I. Harness adjuster strap.
J. Diagonal belt hook.
K. Childs´s seat base
L. Locking clip.
M. Harness strap slot.
N. Harness pad connector.
O. Group 1 vertical and diagonal belt hook.
P. Harness straps.
Q. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 1.
Only suitable for Group 1, approx.
WARNING
De 9-18 Kg.
1. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (3.1).
2. Pass the vehicle diagonal shoulder belt below the headrest, pass
the lap belt through the J guide under the armrest, then slip the
belt through the O guides in the plastic backrest, pass the belt
once more through the J guide under the armrest and fasten the
safety belt to the vehicle anchor point. You will hear a "click" when
properly fastened (3.2, 3.3, 3.4 and 3.5).
3. Check that the seat belt is not twisted or tangled, that the lap belt
passes under the armrests and that the diagonal shoulder belt
passes under the headrest before proceeding (3.6).
4. Place your knee on the seat of the child seat and hold the
diagonal shoulder belt. Pull it upwards to tighten it as much as
possible (3.7).
Grupo 1/2/3 Group 1/2/3
EN
www.babyqs.com www.babyqs.com
21