How To Charge Your Device; Charging The Charger Case; About Led Lights - NANO X2 Rechargeable Instruction Manual

How to charge your device:

Charging the charger case

Step 1 :
Plug in the wall charging unit, insert the included micro-USS cords, and
plug them into your charger case to charge them.

About LED lights:

One light: Device/case power around 20%.
Three lights: Device/case fully charged.
Note: Before using your hearing device for the first time, it is
recommended that you charge it for 7 hours.
19
Note:
1. During charging, the light won't flash unless you open or close the lid.
2. When the lid is opened or closed, the light will flash for 15 seconds and
then automatically go out.
3. After a full charge, the LED will flash for 15 seconds then automatic out.
20