Advertisement
Available languages
Available languages
Abyss™ USB QRG
Description
Overview
AC Power
Power Linking
Fuse
Replacement
The Abyss™ USB is an eye-catching, multi-colored, simulated water effect
light with countless uses. Standard DMX wired control or wireless control
with the convenient built in D-Fi™ USB port (for use with the D-Fi™ USB
from CHAUVET® DJ). The Abyss™ USB can give any surface the feeling of
being underwater. Perfect for the dance floor, front lighting, or wall washing.
Back Panel View
D-Fi™ USB Port
DMX In/Out
Safety Loop
Front View
Lens
WARNING! DO NOT plug anything other than a D-Fi™ USB into the
USB port. Doing so may cause damage to the product.
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from the power via
breaker or by unplugging it.
For the maximum number of Abyss™ USB that can be power linked at
120 V or at 240 V, see the User Manual or the label on the product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Menu
Display
Buttons
3
EN
Fuse Holder
Power In
Power Out
IR Sensor
Advertisement
