Connecting The Drive - NEC Versa LX Manual

Installing the New Drive in the Drive Bay
Use the following steps to install the hard disk drive in the system's drive bay.
Holding the drive by its sides, pull up the hard drive lever.
1.
Keeping the lever raised, lower the new drive into the drive bay.
2. Align the drive connector with the connector in the drive bay.
Pressing against the outer edge of the lever, slide the drive toward the connectors and push
3.
firmly to secure the connection. Do not apply pressure to the drive surface as you push.
4. Press down on both sides of the drive lever to lock it into place.
6 NEC Versa LX and LXi Hard Disk Drive Upgrade Kit
Lowering the drive into the bay

Connecting the drive

A – Drive Connectors