Honda WAVE ALPHA Owner's Manual page 62

Engine Oil
Changing Engine Oil
u
3. Place your vehicle on its centre stand on a
firm, level surface.
4. Place a drain pan under the drain bolt.
5. Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
Drain bolt
58
Sealing washer
6. Install a new sealing washer onto the drain
bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
7. Fill the crankcase with the recommended
oil ( P. 41, 106) and install the oil fill cap/
2
dipstick.
Required oil
When changing oil:
0.8 litres (0.8 US qt, 0.7 Imp qt)
8. Check the oil level.
9. Check that there are no oil leaks.
P. 56
2