Table of Contents
Introduction and Purpose of this Manual .............................................................. 2
Safety Information ................................................................................................. 3
Specifications and Capacity ................................................................................. 4
Description ............................................................................................................ 4
Setup ................................................................................................................. 5-6
Operation .............................................................................................................. 7
Troubleshooting .................................................................................................. 10
Ram Unit ............................................................................................................. 11
Yoke Pin .............................................................................................................. 12
Alignment Table .................................................................................................. 13
X-Y Table (optional) ............................................................................................ 14
Punch Unit
Disassembly / Assembly ................................................................................ 15
Exploded View ............................................................................................... 16
Parts List ........................................................................................................ 17
Introduction
The Greenlee 39693 Bus Bar Punch with Table consists
of a punch unit, hydraulic ram, and an alignment table.
The 39693 is intended to punch copper or aluminum
bus bar up to 12mm x 120mm. Two separate die sets
are furnished with the punch unit - one set for laminated
bus bar and one set for solid bus bar.
The 39693 is intended to be used with any Greenlee
hydraulic pump capable of developing 10,000 psi
(690 BAR), such as:
Manual Pump: 755
Electric Pump (120-volt): 960, 975, 980
Electric Pump (220-volt): 976-22 FS, 976-22-PS,
An optional X-Y Punch Table (catalog number 37736) is
available for repetitious punching of standard 2-bolt and
4-bolt hole patterns.
Additional copies of this manual are available upon request at no charge.
Greenlee Textron / Subsidiary of Textron Inc.
Bus Bar Punch System
980-22 FS, 980-22 PS
A person who has not read and does not understand all
operating instructions is not qualified to operate this tool.
Failure to read and understand safety instructions may
result in injury or death.
Purpose of this Manual
This instruction manual is intended to familiarize
operating and maintenance personnel with the safe
operation and maintenance procedures associated with
the 39693 Bus Bar Punch with Table.
2
4455 Boeing Dr., Rockford, IL 61109-2988
815/397-7070