Alignment Table - Greenlee 39693 Operation, Service And Parts Instruction Manual

Alignment Table (Standard) (503 9021.0)
Assembly
1. Place the punch alignment guide (35) on the
alignment top plate (36). Thread, but do not tighten,
the two button-head screws (34) through the end
slots of the guide and into the top plate (36).
2. Place the alignment top plate (36) on top of the bus
bar alignment plate (30). Insert the adjustable
handle (33) through the middle slot of the punch
alignment guide, through the alignment top plate,
and through the bus bar alignment plate; thread the
handle into the clamping strip (38).
3. Apply a drop of Loctite
threads of the shoulder bolt (39). Insert the shoulder
bolt through the clamping strip (38) and into the bus
bar alignment plate (30). Thread the shoulder bolt
into the hole in the alignment top plate.
4. Attach the scale pointer (31) to the bus bar align-
ment plate (30) with the two drive screws (32).
32
31
30
Greenlee Textron / Subsidiary of Textron Inc.
Bus Bar Punch System
®
242 or equivalent on the
33
34
35
36
38
39
5. Attach the assembled alignment table to the bus bar
punch yoke (X) with four button-head screws (V) as
shown in the exploded view.
6. Place any die in the die holder (T).
7. Adjust the alignment table so that the table top is
level, and at the same height as the top of the die.
8. Tighten the four button-head screws (V).
Key Part No.
30 503 8153.9
31 503 8534.8
32 905 2760.7
33 905 4275.4
34 905 4193.6
35 503 9020.1
37
36 503 9022.8
37 503 7742.6
38 503 7325.0
39 905 3448.4
17
4455 Boeing Dr., Rockford, IL 61109-2988
Description
Busbar Alignment Plate ............ 1
Scale Pointer ............................ 1
Drive Screw .............................. 2
Adjustable Handle .................... 1
M6 Button-Head Screw ............ 2
Punch Alignment Guide ........... 1
Alignment Top Plate ................. 1
Decal ........................................ 1
Clamping Strip .......................... 1
#10 Shoulder Screw ................. 2
815/397-7070
Qty