The Container Store Elfa Instructions For Easy Installation & Assembly page 5

A
B
C
D
elfa freestanding
Tools needed:
and 83" tall solutions
TIPS for getting started
• It's best to have two people to assemble a 62" or 83" tall solution.
• Please note that any solution used away from the wall requires
feet on both sides of the solution.
• If you have Foot Height Extenders, add them before proceeding.
To install, unscrew both levelers from the Foot and screw the
extenders directly into base of the Foot. The levelers can then be
screwed into the Foot Height Extenders and adjusted as needed to
accommodate baseboards between 2" to 4" .
•
If assembling on tile or wood, take care to protect the floor.
Assemble a
Single - Sided Solution
Insert Upright into Foot
STEP 1
– The holes on the side of the Upright indicate the bottom of the
Upright. There is no front or back to the Uprights.
– Line up the Upright with the slot in the Foot.
To secure, you can tap the Upright and Foot together on the ground or
use the mallet. Make sure the Upright is all the way into the slot on the
(Figure B)
Foot.
– Repeat with a second Upright and Foot.
Install Crossbraces
2
STEP
– Place the assembled Uprights/Feet on the floor as shown.
– Insert Crossbraces diagonally into holes at bottom of the Uprights.
(Figure C)
– Gently hold the Crossbraces at the center with one hand. Using your
other hand, lift one Foot so that it faces up, then lift the other Foot.
(Figure D)
plastic mallet, ladder or step stool for 62"
(Figure A)
Continued on page 6
containerstore.com | 800-733-3532
(Figure C)
5