The Container Store Elfa Instructions For Easy Installation & Assembly page 4

A
B
(Ventilated Shelf
Brackets shown)
Installation Service
Let Us Do the Work for You!
Our time-saving Installation Service is available in all
stores. Visit containerstore.com/installationservice
for details.
4 Visit containerstore.com/installation to view video instructions.
Install the Hanging Standards
STEP 4
and Shelf Brackets
– Insert the Hanging Standards in the Top Track notches.
– Group Hanging Standards together and insert Brackets at the
appropriate height based on your space plan.
– Slide the Hanging Standards to their approximate position on the Top
Track. Refer to your design for placement of the Hanging Standards.
– Hanging Standards should be a minimum of 1/2" from the ends of
the Top Track.
You are now ready to install other elfa components. Please refer
to your design and the Quick Reference Guide on page 2 for
component-specific instructions.
Top Track Cover Installation
– You should install your Top Track Cover after you have
completed all the installation steps in this booklet.
– Start with long pieces first. Place the bottom of the Top Track
Cover into the bottom of the Top Track, then ease the top of the
Top Track Cover into the top of the Top Track.
– Measure the area on the Top Track where smaller pieces of the
Top Track Cover are needed.
– Measure and mark the Top Track Cover where the cuts need to
be. The Cover is easily cut in a straight line with scissors.
– Do not overlap segments of the Top Track Cover.
(Figure A)
(Figure B)