Download Print this page

The Container Store Linea Media Stand Assembly Instructions

Advertisement

Quick Links

Linea
Media
Stand
Hardware
(H1) x 12+1 extra wooden dowel
(H2) x 18+1 extra cam bolt
(H3) x 18+1 extra cam lock
(H4) x 8+1 extra
bolt
(H5) x 1
Allen wrench
(H6) x 3
corner bracket
WARNING —
Severe injury may occur if furniture tips over. Never allow children to climb or play on this product. Place heavier items on lower shelves
as far back as possible and never overload. Follow all instructions listed in this assembly guide and always use the anti-tip hardware to mount unit to a wall.
Assembly Instructions
Please read all of the information below before you begin.
Thank you for purchasing the Linea Media Stand. The contents
included in the box are located below and on the next page. Please
take the time to identify the hardware and media stand components.
As you unpack and prepare for assembly, place the contents on a
carpeted or padded surface to protect them from damage.
Required Assembly Tools
You will need both Phillips and flathead screwdrivers. Use a mallet/hammer to tap the dowels into place.
(H1)
(H4)
Phillips Screwdriver
Flathead Screwdriver
(H2)
(H5)
©2013 The Container Store
Hammer or
Mallet
(H3)
(H6)
®
Inc. All rights reserved. 18023 3/13

Advertisement

loading
Need help?

Need help?

Do you have a question about the Linea Media Stand and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for The Container Store Linea Media Stand

  • Page 1 Please read all of the information below before you begin. Stand Thank you for purchasing the Linea Media Stand. The contents included in the box are located below and on the next page. Please take the time to identify the hardware and media stand components.
  • Page 2 Item Description Quantity A. Top Shelf B. Middle Shelf C. Bottom Shelf D. Left Side Assembly E. Right Side Assembly F. Front Leg G. Rear Leg Cam Lock Instructions 180º ©2013 The Container Store ® Inc. All rights reserved. 18023 3/13...
  • Page 3 1. Use the bolts to secure part (G) to the underside of the unit. 1. Secure part (F) using the bolts and corner bracket. 2. Use corner brackets on the underside of the top two shelves. ©2013 The Container Store ® Inc. All rights reserved. 18023 3/13...
  • Page 4 Top shelf holds up to 100 pounds or a 40” flat panel TV. Lower shelves hold up to 30 pounds each. ® ©2013 The Container Store Inc. All rights reserved. 18023 3/13...