Download Print this page

The Container Store TEAK BOOKCASE Assembly

Advertisement

Quick Links

To do efficient assembling:
Check the contents of the plastic bag with hardware and sort out
properly.
Have the necessary tools for assembly ready.
Unpack and sort out the various components of the book case.
Arrange for sufficient free space to do the assembling.
Arrange for a Second Person to assist:
Tools Needed:
The plastic bag contents:
Short
Bolt
screw
x 8
x 24
Please call 1-800-733-3532 for more information.
TEAK BOOKCASE ASSEMBLY
Long
screw
x 8
Locking
Washer
device
x 8
x 24
Safety
bracket
x 2

Advertisement

loading
Need help?

Need help?

Do you have a question about the TEAK BOOKCASE and is the answer not in the manual?

Questions and answers

Summary of Contents for The Container Store TEAK BOOKCASE

  • Page 1 TEAK BOOKCASE ASSEMBLY To do efficient assembling: Check the contents of the plastic bag with hardware and sort out properly. Have the necessary tools for assembly ready. Unpack and sort out the various components of the book case. Arrange for sufficient free space to do the assembling.
  • Page 2 - Each panel has a label. - When installing panels, label should face the back of the unit. Various Components: A - Top & Bottom Shelf B - Side Panels C - Middle Shelf D - Back Panels...
  • Page 3 Step No. 1 Screw in the bolts. Turn until tight. Bolt Do not Locking overtighten. device Locking device Add locking device in slot with arrow pointing towards hole on side Step No. 2 Make sure arrows are pointing at the screws before attaching Lock gently.
  • Page 4 Step No. 3 Make sure arrows are pointing at the screws before attaching Lock gently. quarter turn only to lock. Step No. 4 Install back panels in order starting with D1, D2, D3, Put pressure on D4, D5 the back panel to flatten it...
  • Page 5 Make sure arrows are Step No. 5 pointing at the screws before attaching Bottom Put in short Step No. 6 screws in between panels starting at bottom (4) IT IS IMPORTANT TO PUT THE SCREWS IN Bottom BETWEEN PANELS (1,2,3,4) SO THE BACK PANEL WILL BE FLAT...
  • Page 6 Safety bracket Option: Use long screws To keep the Book case in Good Condition: Don’t use force during assembly. Tighten the screws after one month. Keep the assembly tools in a safe place. Keep the assembly instructions in a safe place. Use mild furniture polish to clean the bookcase.