Seaside Casual MAD Series Assembly Instructions

MAD Chairs
281 Dining Arm Chair
282 Balcony Arm Chair
283 Bar Arm Chair
284 Dining Side Chair
285 Balcony Side Chair
286 Bar Side Chair
1
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.
Carefully remove contents from box. Make sure that all parts and hardware
are included using the Parts List below.
Tools Required:
Back Assembly
Front Apron
x 1
1-3/4" Phillips Head Screw
Actual Size
Part Code: 316-8X1-3/4PFDS
80mm Hex Lag
Actual Size
Part Code: 316-1/4-10-80HL
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | sales@seasidecasual.com
ASSEMBLY INSTRUCTIONS
4mm Allen Wrench (included); #2 Phillips Head Screwdriver;
(Recommended: Rubber Mallet; High Powered Drill)
x 1
Rear Apron
Bar & Balcony Height x 28
Dining Height
Bar & Balcony Height x 8
Dining Height
Seat Assembly
x 1
Front Stretcher Assembly
Bar and Balcony Only
x 1
x 22
x 4
281-
REV A
Left and Right Side Assemblies
Right
Rear Stretcher
Bar and Balcony Only
x 1
4mm Allen Wrench
Actual Size
Part Code: 4MMALLEN
5/8" Bungs
Bar & Balcony Height x 8
Dining Height
282 283- 284-
-REV A REV A REV A
Left
x 1ea
x 1
x 1
x 4
Page 1
285 286-
-REV A REV A