Enter To Menu; Set Limits; Set Check Weighing Mode - T Scale RWP Technical Manual

RWP Weighing Indicator Technical Manual(v1.16)
It can set an upper or lower limit when weighing with the limits range.
During the limit controls dividing the unit will indicate whether a value
upper or lower limits with an alarm sound . For details see the parameter F3 oFF.
 Check mode 1: No beep sound in the limits. Function turned off.
 Check mode 2: When the weight is between the limits. OK will shown and
 Check mode 3: When the weight is out of the limits, the beeper will be

5.6. Enter to Menu

In the weighing mode, press
Display will be appear

5.7. Set limits

Press key to enter the function.
Press key to select the limit.
Display will appear
Press key key to enter, press
Press key to change the value. After enter the value press
sure.
Press key to escape.

5.8. Set check weighing mode.

After entering the settings mode,
Press key until display will be appear
beeper will be sounded.
sounded and OK will shown.
key and
F0 H-L
or
Set hi
key together.
Set Lo
key to move active digits.
F3 oFF
key to
- 12 -